1,800 sq ft one-story home: $10,800 – $14,500
Simple gable roof, one existing shingle layer, standard architectural shingles. About 22 roofing squares (1 square = 100 sq ft of roof).
Roof replacement cost
What a roof replacement costs in Katy, Fulshear and Richmond.
Real ranges, not a teaser. Every number on this page comes from the same owner-approved local pricing our instant estimate uses, so you can plan before anyone climbs a ladder.
Updated
Pricing 2026.09-v1
Typical 2026 replacement ranges
Complete tear-off and replacement with architectural shingles. Ranges are planning figures rounded to the nearest $100; the written scope after the inspection lists exactly what is included.
2,400 sq ft one-story home: $16,600 – $22,500
Hips and valleys, one existing layer, standard architectural shingles. About 34 roofing squares (1 square = 100 sq ft of roof).
3,000 sq ft two-story home: $10,700 – $14,500
Typical master-planned community roofline, one existing layer, standard architectural shingles. About 21 roofing squares (1 square = 100 sq ft of roof).
3,000 sq ft two-story home, Class 4 shingles: $11,700 – $15,800
Same home with impact-resistant (Class 4) shingles. About 21 roofing squares (1 square = 100 sq ft of roof).
4,000 sq ft two-story home: $16,800 – $22,800
Complex roofline with many valleys and wall transitions, one existing layer. About 33 roofing squares (1 square = 100 sq ft of roof).
What moves the number
Five things decide most of the price.
Roof area
Measured in squares of 100 sq ft. Footprint, overhangs and pitch set it, not the home's living area.
Pitch and complexity
Valleys, hips, dormers and wall transitions add cutting, waste and labor. A cut-up roof can need 20% more material than a simple gable.
Stories and access
Two- and three-story homes need more safety equipment and handling time.
Layers to remove
Each existing layer is torn off and hauled away. A second hidden layer is one of the most common changes found at inspection.
The shingle you choose
Standard architectural, enhanced lines, or Class 4 impact-resistant shingles that can lower your insurance premium.
Local questions
Roof cost questions from local homeowners
How much does a new roof cost in Katy or Fulshear in 2026?
Most single-family asphalt shingle replacements we price in Katy, Cinco Ranch, Fulshear and Richmond fall between about $10,700 and $22,800. Roof size, pitch, number of stories, layers to remove and the shingle you choose move the number most. An inspection confirms decking and flashing condition before a final price.
What does a roof cost per square in the Houston area?
Our base installed price for architectural shingles is $450 per square before tear-off, and removing one existing layer adds $125 per square. Steeper or cut-up roofs need more material and labor, so the per-square total rises with complexity.
How much more do Class 4 impact-resistant shingles cost?
About $55 more per square than standard architectural shingles, which is roughly $1,000–$2,000 on a typical home. Texas insurers must offer a premium discount for qualifying impact-resistant roofs; the amount varies by insurer, so ask yours for the figure before you choose.
Why does a bigger house sometimes cost less to roof?
Price follows roof area, not living area. A two-story home stacks its living space under a smaller roof, while a sprawling one-story home of the same size can need far more roofing.
What can change the price after the inspection?
Rotted or damaged decking, a second hidden layer of shingles, flashing that needs rebuilding, and ventilation corrections. The written scope names these possibilities and how any change is approved before work continues, so a discovered condition is never an unexplained charge.
Does insurance pay for a roof replacement?
Sometimes, when a covered event such as hail or wind caused the damage. That decision belongs to your insurer. We document roof conditions and provide a construction estimate; Texas law also prohibits a contractor from paying or waiving your deductible.
Do you offer financing?
Yes. Financing is available through a third-party lender for qualifying projects. Ask for the current terms when we review the written scope.
See the number for your roof
Answer six questions about your home and get a range from the same pricing, or call and we will schedule a 30-minute inspection at no charge.
Start with a clear conversation
Tell us what decision you are trying to make.
Share the property, what you noticed, and the decision you need to make. We’ll confirm fit and explain the clearest next step.